Refurbish and migrate the existing legacy TREND IQ2 Controllers and TREND 962 into IQ3 Series of Controllers and TREND 963 BMS supervisor software.
The HVAC equipment like Chillers, AHUs & Fan Coil Units, etc. are controlled and monitored by the TREND 963 BMS Supervisor software.
The Project has been commissioned in 2016 and handed over to the client.
Controls Systems Used:
Provide Building Automation System for the HVAC equipment.
All HVAC equipments in hospital is monitoring in the Building Management System.
The project consists of around 2500 data points and Supervisor software from TREND Controls/Honeywell for controlling & monitoring the hospital systems.
The Project has been commissioned in 2018 and successfully handed over to the client.
Dar Al Kamal hospital is a general multi-speciality hospital tertiary care facility located in high-end community of Sharjah – Al Fisht area close to the seaside.
Controls Systems Used:
Refurbish and migrate the existing BMS supervisor software to Niagara 4.0
The HVAC equipment like AHUs & Fan Coil Units etc. are monitored through the Niagara 4.0 BMS Supervisor software.
The Project has been commissioned in 2019 and handed over to the client.
Controls Systems Used:
Our scope work was to commission the PLC-based Energy/Current monitoring system for the feeders connected to the server racks. All the outgoing feeders in the SMDBs and DBs feeding to the server racks have Current sensors that are connected to ABB CMS-600 Control Unit. In addition, energy meters are also available for energy measurements.
The CMS-600 can be used as a highly-efficient-measurement system, even in very large, extensively networked installations. These CMS-600 and Energy Meters are monitored remotely on the AC 500 PLCs through Modbus RS485 interface.
The Energy monitoring PLC is integrated with the project BMS so as to monitor the electrical parameters of each PDUs from BMS station
The Project has been commissioned in 2019 and handed over to the client
Abu Dhabi Islamic Bank (ADIB), a leading Islamic bank in the UAE with headquarters at Abu Dhabi
Controls Systems Used:
Provide Building Automation System for the HVAC equipment like FAHU, AHUs & Fan Coil Units, etc. The refrigeration systems, Daikin VRV system & various third party systems are also integrated into the BMS Supervisor software.
Sentrol has provided DDC Controls & BMS Supervisor software from TREND Controls/Honeywell. The project consists of around 5000 data points incorporated in Two Outstations for the HVAC & Lighting Controls including the software integration of Third-party systems like Refrigerant System & Air Conditioning System (VRF Units).
The Project has been commissioned in 2019 and successfully handed over to the client.
Controls Systems Used:
Provide HVAC Control for AHUs.
Sentrol has provided DDC Controls from TREND & JACE Controls/Honeywell & 12” Touch Panels from Loytec for the User interface for the HVAC Controls and Sentrol has provided MCC Panels with ABB Switchgear.
The Project has been commissioned in 2019 and handed over to the client.
Spinneys is a supermarket chain active in the United Arab Emirates, Egypt, Qatar, Lebanon, Oman and Pakistan, and Afghanistan.
Controls Systems Used:
Provide Floor Cooling Control System
Sentrol has provided DDC Controls from TREND for the Floor Cooling Control System.
The Project has been commissioned in scheduled in 2020.
The India Pavilion is one of the largest pavilions at the Expo, at par with pavilions of countries such as USA and China. It is one of the three Pavilions at the Expo which would be retained for posterity after the event and would be a part of the Legacy Phase, Dubai.
Controls Systems Used:
Warehouse No. 28, Plot No. P.599-419
Jebel Ali, Industrial Area-1
P.O.Box: 233506, Dubai – UAE
